Production Version
The
prototype video boards had demonstrated that the V9958
was going to work well for MTXPlus+ and were also
used to develop the
automated wait
generation logic required to allow the V9958 to operate
at the maximum CPU speed of the system.
A number of small changes to the board were
also made for the production board
-
S-Video, Audio and SCART (using a 15-pin
D socket) connectors were added to the PCB
-
The header for connection to an external
SCART connector was retained
-
A header was added for the V9958 Colour
Bus (for future use)
The KiCAD schematic of the PCB |
|
The KiCAD
model of the PCB prior to manufacture
|
|
References:
Roger
Samdal's Spectravideo site,
VDP page
GR8BIT project, Eugeny Brychkov,
GR8BIT Knowledge Base article on adding
Composite and S-Video output (KB0014).