Over its lifetime, the Memotech Video Wall system was supplied in a number of different configurations and with different hardware components. Very little technical documentation survives, so the details here are a snapshot of my Video Wall hardware. It has become clear that I have components from a number of different systems, none of which are complete, but I should have enough components to put together a small Video Wall system in due course.

Video Decoder / Distribution Amplifier

• Decoder Board
• Distribution Amplifier Board

Video Wall Controller - Distributed Digital Frame Store

• Frame Store Controller Board
• Frame Store Memory Board
• Power Supply

Video Wall Operator Interfaces

• MTX Computer
• Reflex Controller

System Cabling

Hardware Status - 24 October 2016

• MTX512-S2 - Tested - Working
• Reflex Controller - Tested - Working (with external RAM)
• DDFS - PSU replaced - Ready for testing
• D/DA No.1 s/n 1107/8 - Tested, faulty - no RGB outputs
• D/DA No.2 s/n 1254/4 - Tested - Working
• D/DA No.3 s/n 1335/4 - Tested - one RGB output not generating Green
• D/DA No.4 s/n 2032    - Tested - Working

System Number 2

• MTX2000 s/n - Tested - Working
• DDFS No.1 s/n - Tested - Working
• DDFS No.2 s/n - Tested - Working
• D/DA s/n -  - Tested - Working