|
HomeVision Pro - Specifications
Information downloaded from the Custom Solutions web
page.
|
Feature |
Specification |
| # of flags,
variables, timers, scheduled events, periodic
events, IR signals, and macros |
255 each
|
| Maximum
schedule length |
8000 (or
more) lines |
| Data log
size |
64K bytes |
| TV event log
size |
256 lines |
| Port A (8
relays) ratings |
Single-Pole-Double-Throw (SPDT) power relays for
10Amps at 125VAC, 6Amps at 277VAC, and 5Amps at
100VDC |
| Port B (8
digital inputs) ratings |
+/-30VDC,
pulled-up via resistor (which can be disabled
with switches) |
| Port C
(8-input configuration) ratings |
0 to 5VDC,
pulled-up |
| Port C
(8-output configuration) ratings |
0 and 5VDC
at 20mA |
| System
status LEDs |
43 |
| Video output |
Color NTSC
video standard (PAL video on international
units) |
| Serial ports |
Three
ports. One supports RS-232 only. The other two
support RS-232, RS-485 half-duplex (two-wire
mode), and RS-485 full-duplex (four-wire mode).
All support baud rates of 300, 600, 1200, 2400,
4800, 9600, 19200 and 57600. All use standard
communication settings of 8 data bits, 1 start
bit, 1 stop bit, and no parity. |
| USB port |
One. When
used, one of the serial ports is not available. |
| Analog
inputs (4) |
0 to 5 VDC,
8-bit resolution |
| Digital
temperature sensor interface |
Up to 64
sensors can be connected to the same three
wires. Each sensor has it's own unique address
so it can be individually read. Temperature
range of -50 to +205 degrees F. 1 degree F
resolution. 15 sensors can be automatically read
per second. |
| Dimensions |
14" x 13 x
3" |
| Required
power source |
12VDC,
1.2Amps. 2.1mm plug with center positive |
| Maximum
number of Multifunction Expansion Boards |
2 |
| PC operating
system |
Windows 3.1,
3.11, 95, 98, 2000, NT, or XP |
| Recommended
PC |
486, 90MHz,
32M Bytes RAM, VGA monitor or better, hard disk
with 6M Bytes free, one serial port or USB port. |
|
|
